加入了是否已经连接mqtt服务器的检测，只有当连接失败的时候，才会重连mqtt服务器，减少tcp请求，节省服务器资源

app/stm32fxxx_app/app/fault_manager.h

@@ -166,8 +166,8 @@ typedef enum
 //******报警级别******//
 typedef enum
 {
-	kFaultLevel_Normal = 0,
-	kFaultLevel_First,
+		kFaultLevel_Normal = 0,
+		kFaultLevel_First,
     kFaultLevel_Second, 
     kFaultLevel_Third,
     kFaultLevel_End,

app/stm32fxxx_app/protocol/protocol_can_bcu.c

@@ -363,7 +363,7 @@ void bcu_send_0x42500000(can_dev_e can)
 		uint16_t tmp_16u;
 		uint8_t tmp_8u, status;
 		uint16_t temp_second;
-		uint16_t temp_third;
+		uint16_t temp_first;
 	
 	/*	基本状态
 		pylon  bluesun
@@ -398,18 +398,18 @@ void bcu_send_0x42500000(can_dev_e can)
 	//故障--无
 	tmp_8u = 0;
 	WRITE_LT_INT8U(buf, len, tmp_8u);
-	//告警--二三级放入告警中
+	//告警--一二级放入告警中
 	//每个告警的位的位置需要测一下
 	
 	temp_second = set_bit_based_on_source_pylon(status, kFaultLevel_Second);
-	temp_third = set_bit_based_on_source_pylon(status, kFaultLevel_Third);
+	temp_first = set_bit_based_on_source_pylon(status, kFaultLevel_First);
 	
-	tmp_16u = temp_second | temp_third;
+	tmp_16u = temp_second | temp_first;
 	WRITE_LT_INT16U(buf, len, tmp_16u);	
-	//保护--一级放入保护中
+	//保护--三级放入保护中
 	//每个告警的位的位置需要测一下
 	
-	tmp_16u = set_bit_based_on_source_pylon(status, kFaultLevel_First);
+	tmp_16u = set_bit_based_on_source_pylon(status, kFaultLevel_Third);
 	
 	WRITE_LT_INT16U(buf, len, tmp_16u);	
     bsp_can_ext_data_sync_send(can, 0x00004250, buf, len);

app/stm32fxxx_app/protocol/protocol_modbus_bcu.c

@@ -126,7 +126,7 @@ uint16_t bcu_total_msg_fill(uint16_t start_addr, uint8_t reg_num, uint8_t *buf)
 		READ_FC03_F04_ITEM(11, bms_get_bmu_num());
 		//12 在线从机总数
 		READ_FC03_F04_ITEM(12, bms_get_bmu_online_num());
-		//13 电池总数
+		//13 电池总数  电芯总数
 		//READ_FC03_F04_ITEM(13, get_eeprom_data(kEep_CellNum, kEepromDataType_Full));
 		READ_FC03_F04_ITEM(13, bms_get_cell_num());
 		//14 在线电池总数

app/stm32fxxx_app/protocol/protocol_mqtt_bcu.c

@@ -92,13 +92,13 @@ uint32_t bms_get_baseInfo(uint16_t input)
         tmp = bms_get_bmu_online_num();
         return tmp;
     case 13:
-        tmp = get_eeprom_data(kEep_CellNum, kEepromDataType_Full);
+        tmp = bms_get_cell_num();
         return tmp;
     case 14:
         tmp = bms_get_statistic_data(kStatisticData_OnlineCellNum);
         return tmp;
     case 15:
-        tmp = get_eeprom_data(kEep_TempNum, kEepromDataType_Full);
+        tmp = bms_get_temp_num();
         return tmp;
     case 16:
         tmp = bms_get_statistic_data(kStatisticData_OnlineTempNum);
@@ -346,6 +346,7 @@ uint32_t bms_get_fault_level_1(uint16_t input)
         {
             tmp = 0;
         }
+				return tmp;
     case 13:
         if (KIT_GET_BIT_32(bms_get_fault_single_bit(1, kFaultLevel_First), 12))  //1级极柱过温
         {
@@ -371,6 +372,7 @@ uint32_t bms_get_fault_level_1(uint16_t input)
         return tmp;
     case 16:
         tmp = bms_get_statistic_data(kStatisticData_OnlineTempNum);
+				return tmp;
         break;
     default:
         return 0;
@@ -501,6 +503,7 @@ uint32_t bms_get_fault_level_2(uint16_t input)
         {
             tmp = 0;
         }
+				return tmp;
     case 13:
         if (KIT_GET_BIT_32(bms_get_fault_single_bit(1, kFaultLevel_Second), 12))  //2级极柱过温
         {
@@ -649,6 +652,7 @@ uint32_t bms_get_fault_level_3(uint16_t input)
         {
             tmp = 0;
         }
+				return tmp;
     case 13:
         if (KIT_GET_BIT_32(bms_get_fault_single_bit(1, kFaultLevel_Third), 12))  //3级极柱过温
         {
@@ -668,6 +672,7 @@ uint32_t bms_get_fault_level_3(uint16_t input)
         {
             tmp = 0;
         }
+				return tmp;
     case 15:
         if (KIT_GET_BIT_32(bms_get_fault_single_bit(2, kFaultLevel_Third), 9))  //极限故障
         {
@@ -677,6 +682,7 @@ uint32_t bms_get_fault_level_3(uint16_t input)
         {
             tmp = 0;
         }
+				return tmp;
     case 16:
         if (KIT_GET_BIT_32(bms_get_fault_single_bit(1, kFaultLevel_Third), 1))  //预充故障
         {
@@ -686,6 +692,7 @@ uint32_t bms_get_fault_level_3(uint16_t input)
         {
             tmp = 0;
         }
+				return tmp;
     case 17:
         if (KIT_GET_BIT_32(bms_get_fault_single_bit(2, kFaultLevel_Third), 10))  //开路故障
         {
@@ -695,6 +702,7 @@ uint32_t bms_get_fault_level_3(uint16_t input)
         {
             tmp = 0;
         }
+				return tmp;
     default:
         return 0;
     }
@@ -1089,7 +1097,17 @@ void mqtt_publish_bms_data(uint32_t basetime)
 //								mqtt_init_flag = 0;
 //						}
 //				}
-				drv_mqtt_connect();
+			
+				if (!drv_at_send_cmd("AT+QMTCONN?", "0,3\0", WIFI_TIMEOUT)) 
+				{
+						drv_mqtt_connect();
+				}
+//				else  //@wangk add 5-16,这段注释可以证明上述if起作用了，只有检测没有连接到mqtt的时候，才会执行连接函数，避免消耗资源
+//				{
+//						drv_mqtt_publish_no_respose("1", 1);
+//				}
+			
+				
 //				drv_wireless_send_string("AT+QMTPUB=0,1,2,0,\"BCU01\",17,\"Hello from FC41D!\"");
         mqtt_cycle_tick = 0;
         publish_all_bms_groups();